With the increasing demand of the market. Now aluminum tubes have been widely used in daily life and production. Today, we have to share the knowledge of the installation of aluminum tubes with the partners. If you are curious about this, I hope that the following knowledge can help you learn more useful knowledge. At the same time, it is necessary to use the process of hanging down the pipe. The following is to say that before the process operation of the pipe is carried out, the operator should check the spiral tube carefully to prevent the pipe from being moved when the pipe is moved. The expert of the radiator suggests that in the process of being used in the field, the special material of the aluminum tube should be used to avoid the deformation of the pipe itself in the process of processing because of the pressure inside and outside of the aluminum tube.
Industrial use, people often use this pipe called aluminum tube, but during the use of the people also need to do it well, so as to ensure that the service life will not be shortened, so when people use and save aluminum tubes should pay attention to where, below, my staff will give you a detailed introduction. First, the equipment must be surface treatment before the coating, and in the process of construction can not carry any dust, water and oil pollution, so as to ensure the quality of the product. Secondly, the aluminum pipe for the use of materials is not too large, random use, but in six hours to use. And the unfinished material must be sealed and sealed. In addition, the manufacturer of electric rings also said that when people keep it, pay attention to place it in a cool place, and keep it dry, isolate the fire and avoid a fire.