Categories

Aluminum

Aluminum Extruded Profile

Aluminum profile/Extrusion Price is one of the basic products. We are capable to design and extrude aluminium extrusion profiles with diameter up to 200mm. The most commonly alloys are 6061, 6063, etc. We accept different surface treatment like Anodize, Powder Coating, Polish, Brush, ect. Both......
Chat Now

Alloy No.

Wall Thickness(mm)

Drawing

Length(mm)

Temper

A1050,A1060, A1070,A1100

Above0.8

Any drawing is available

20-8000

O,H12,H22,H14,H16,H18,
H24,H26,etc

A6061,A6082,A6063,6005

Above0.8

20-8000

T3,T4,T5,T6, T651,etc

Fabrication

1.Cutting,2.Drilling,3.Punching,4.Millling,etc

Packing : Inner plastic paper interleaving each profile,outer fixed by plywood or pallets, or as
per your requirements

Standards:ASTM-B209. EN573-1, GB/T3880.1-2006

Quality of material: totally free from defects like white rust,oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set

Application : Mainly used for car cylinder parts,  heat sinks,railway luggage shelf , assembly line, construction  and industrial aluminium profiles,  home appliance etc.

MOQ

1 tons

Payment term:

TT,L/C

Delivery Time

15 days after 30% TT payment or receiving L/C copy

Kind attention : Specifications can be customized as the customer’s requirements.


Aluminum profile/Extrusion Price is one of the basic products. We are capable to design and extrude aluminium extrusion profiles with diameter up to 200mm. The most commonly alloys are 6061, 6063, etc. We accept different surface treatment like Anodize, Powder Coating, Polish, Brush, ect. Both standard and customized aluminium extrusions are available.

 

Different alloys have different properties, the selection for alloys is important for aluminium extrusion profile.


1000 series for Aluminium Profile:This non-heat treatable aluminum alloy series is available in extruded sections with a minimum purity of 99.0% aluminum for 1100 alloy and as high as 99.6% minimum aluminum for 1060 alloy.They offers the best corrosion resistance of any alloy group and displays excellent forming,welding,brazing and finishing characteristics.These alloys can be extruded as profiles,rod,bar and tubing.Typical alloys are as follows:1050,1060,1350,1100

 

6005 alloy for Aluminium Profile:As medium strength alloy that is similar to alloy 6061 except it contain higher amount of silicon.It is used in designs that require moderate strength,but is generally not recommended for applications where the structure may be susceptible to impact or overloading.


6061 alloy for Aluminium Profile:it is one of the most widely used alloys in the 6000 series,popular for medium to high strength requirements and has good toughness characteristics.It is suggested for standard and custom,solid and hollow shapes,rod and bar products,and semless and structural pipe and tube.It has good corrosion resistance and offers good finishing characteristics and responds well to anodizing.however where cosmetic apprearance is critical,consider the use of alloy 6063.


6063 alloy for Aluminium Profile:One of the most popular alloys in the 6000 series,provides good extrudability and a high quality surface finish.Used in standard architectural shapes,custom solid shapes and heatsinks,as well as seamless and structural tube and pipe.It provides good resistance to general corrosion,and offers excellent response for anodizing in its T5 temper.

 

Detailed Introduction of typical Alloys for Aluminum Profile

A. Chemical Composition for Aluminium Profile

Alloy

Mg

Mn

Fe

Si

Cu

Zn

Cr

Ti

Other Elem

Total Others

Al

6061

0.8-1.2

≤0.15

≤0.7

0.40-0.8

0.15-0.40

≤0.25

0.04-0.35

≤0.15

≤0.05

≤0.15

Rem.

6063

0.45-0.9

≤0.10

≤0.35

0.20-0.6

≤0.10

≤0.10

≤0.10

≤0.10

≤0.05

≤0.15

Rem.

 

B. Detailed Description for typical Aluminum profile

Alloy 6061 for aluminum profile

Composition:Al 1.0Mg 0.6Si Cu Cr (Aluminum 6061 for Industry Aluminum Profile )

Characteristic Properties:Very good corrosion resistance. Very good weldability; reduced strength values in the zone of welding. Heat treatable alloy. Medium high strength alloy with a strength higher than 6005A. Medium fatigue strength. Good cold formability in the temper T4. Not suitable for very complex cross sections.


Applications:

Heavy duty structures in rail coaches, truck frames, ship building, bridges, military bridges, aircraft, piping, pylons and towers, transportation, boilermaking; Motorboats, aerospace applications, helicopter rotor skins; Rivets.

 

Alloy 6063 for aluminum profile

Composition: Al 0.7Mg 0.4Si (Aluminum Profile 6063 Industry Aluminum Profile)

Characteristic Properties:Very good corrosion resistance. Very good weldability. Medium strength heat treatable alloy slightly lower than 6005A. Medium fatigue strength. Good cold formability especially in temper T4. Suitable for very complex cross sections. Standard decorative anodizing quality.


Applications: 

Architectural sections for windows, doors, curtain walls. Interior fittings, frame systems, lighting, ladders, railings etc. Heat sink sections, electronic modules, electro motor housings. Flexible assembly systems, special machinery elements; Truck and trailer flooring, pneumatic installation, railway, inside applications. Irrigation pipes. Furniture, office equipment. Radiator and other heat exchanger applications;

 

Packaging and shipping for aluminum profile

After production process, Aluminum Extrusion Profile will come into the aluminum packing process. Our Packing staff will study different design and figure out the quantity and the way to be packed in one bundle, thus the proper way will be chose to avoid over heavy weight and to protect the aluminium extrusion profile. Generally, two ways of packing are available: one is in brown paper and another is in shrinking film. Firstly, the pearl film will be wrapped on the surface and angle of aluminum extrusion profile to avoid any scratch between them, then bonded by a small film strip will be placed middle and end of the aluminum extrusion profile. Lately brown paper or shrinking film will be chose

image001.jpg


At your option to cover the aluminium extrusion profile. A small tag standards for certificate of birth which it will states code number, length, surface treatment, production date. ect. Brown paper is a workable means to mostly protect the aluminium extrusion profile with lower cost comparatively. Our brown paper is in three layers, thick enough to resist rough handling. It is extremely suitable for long distance transportation. The Shrinking film is light in weight, the thickness counts from 8cto 12c which is at your option. They are usually used for short distant transportation, more ever, it has the overwhelming advantage of convenience for sales in the super market, vision to catch.

image002.jpg

 

Our service for aluminum profile

In order to provide a professional service and accurate product to our customer, we usually offer the following process to finalize any order for aluminium extrusion profile:

1. Production possibility confirmation: Detailed drawing or sample as well the dimension requirement of the specific aluminium extrusion profile are expected to be provided to our engineer department for the confirmation of the production possibility or any difficulty in design or surface treatment.

2. New drawings will be provided to customers for confirmation with detailed information in about 3-7 days, subject to the quantity of dies

3. Color sample should be confirmed by both seller and buyer to avoid any misunderstanding before placing any real orders

4. Samples of this specific aluminium extrusion profile will be ready as soon as the die charge is paid(which will be returned in the future),in about 15-20 days.

5. After the sample is confirmed, massive production could be started

 

The types of Standard Aluminum Extruded Sections on offer includes; 

Round bar, Square Bar, Hexagonal Bar, Flat Bar, Channel and Angle sections. Traditionally Flat bar, Angle and Channel are stocked in Alloy 6063 T6, where as Round, Square and  Hex bar are most commonly available in Alloys 6061 T6 and  6082 T6 as this Alloy  is known for their excellent machining properties. Euro Steel  can offer other alloys and Tempers on request.

Not all profiles are required to be tube. Whether it is a seamless extruded hollow-profile or a porthole extruded profile-tube, in Unna we have a multitude of possibilities.

Simple profiles, such as a solid profile or an angle profile, are also available. On some special profiles we may have the possibility to enhance the production tolerances by adding a drawing step to achieve final dimensions. In addition to round tube, seamless square or rectangular tubes in high-strength alloys can be produced.

With this manufacturing spectrum we would be pleased to assist you in making the right choice. In accordance with your requirements, we can create an individual solution, or construct a quotation drawing to meet your requirements. We are ready for the challenge!


Executive Standards:

ASTM B211 BS EN 755 DIN EN 754


Material Grade:

1060, 1070, 2011, 2014, 2017, 2024, 5052, 5056,6060, 6061, 6063, 6082, 6463, 7005, 7050, 7075 est.


Size Range:

Round : Up to Φ250 mm, Rectangle: Up to 400 mm*40 mm,
Square : Up to 150 mm*150 mm"


Finish Type:

"O" "H" "T" "F"

T.S. Industrial supply 2024, 7075 and 6061 aluminum bar, but offer an additional selection of alloy grade aluminum bar in a variety of specifications and offer cut to length programs from our strategically located facilities around the world.


Hot Tags: aluminum extruded profile, China, suppliers, manufacturers, price
  • QR CODE
  • facebook